Adding a digital interface metering device

Before creating a gateway metering device you need to add the gateway itself. Instructions: Creating a gateway (LoRaWAN Radio Modem) Creating a gateway (GPRS modem) Creating a gateway (Ethernet converter) To create a gateway metering device it is necessary to take the following steps: 1. Go to the Devices section. […]

Add a new gateway (Ethernet converter)

To create a gateway take the following steps: 1. Go to the “Devices” section. 2. Click on the “Add new device”. 3. Select “Add Gateway”. 4. Select the BS “Manufacturer”. 5. Select the BS “Model”. 6. Select “Connection Type”. 7. Enter the “Name” of the gateway. The name is entered […]

Adding a gateway (GPRS modem)

To create a gateway take the following steps: 1. Go to the Devices section. 2. Click on the Add new device. 3. Select Add Gateway. 4. Select the BS Manufacturer. 5. Select the BS Model. 6. Select “Connection Type”. 7. Enter the Name of the gateway. The name is entered […]

Adding a metering device (LoRaWAN)

To create a metering device, do the following: 1. Go to the “Devices” section. 2. Click “Add new device”. 3. Select Add meter. 4. Select a category. 5. Click on the switch by selecting the connection via Built-in modem. A built-in modem means a built-in LoRaWAN module, a GPRS modem […]

Add a Base Station

To create a Base station (BS), it is necessary to: 1. Go to the Devices section. 2. Click the Add new device. 3. Select “Add base station”. 4. Select the BS “Manufacturer”. 5. Select the BS “Model”. 6. Select “Connection Type”. LoRaWAN v1.0.3 — Gotthardp (standard pre-installed LoRa server); LoRaWAN […]

Adding a Gateway (LoRaWAN Radio Modem)

To create a gateway take the following steps: 1. Go to the Devices section. 2. Click the Add new device. 3. Select Add Gateway. 4. Select the BS Manufacturer. 5. Select the BS Model. 6. Select “Connection Type”. LoRaWAN v1.0.3 — Gotthardp (standard pre-installed LoRa server); LoRaWAN v1.1 (NEW) — Chirpstack. […]

Devices – General information

This section shows all the devices that have been added to the profile.All devices are grouped by the following types: Metering devices, Gateways and Base stations. Metering devices are meters, sensors and other devices that measure, accumulate, store and display information on the resource consumed and the status of sensors. […]

Device control

Moving to Device control is available in the Data section. Control button it is available only to those devices that have remote reading or parameter changing functions. Electric meter control. Relay control – allows you to manually control the load of the electric meter (turn it on or off). You need […]

Removing devices

After deleting the devices, all their data will be deleted without the possibility to recover. The devices themselves will also be impossible to restore. If the device is bind to a metering point it cannot be deleted. In this case, the device must first be unbound from the metering point […]